中文|ENGLISH
Welcome to Jiangyin Hetron elastomer New Material Technology Co., Ltd.!
Your current:  Home  >  News CenterNews Center
Thermoplastic elastomer introduction
Product Category 
1)The thermoplastic elastomer blend (TPE) 
Thermoplastic blends elastomer , or TPE. It is a block copolymer of styrene and butadiene. Or use polystyrene-terminal segment, via polybutadiene hydrogenation, linear triblock copolymer with ethylene - butene copolymer mid elastomeric block is obtained. After heated the material can flow, easy molding. After cooling to room temperature, the polystyrene segment gathered into glassy domains, physical crosslinked polybutadiene segments, so that the material exhibits properties of rubber. TPR has the physical and mechanical properties of vulcanized rubber and processability of plastic. Because no curing process is required, TPV can be processed by general plastic processing equipment. TPR has wide hardness range, excellent color properties, soft touch, weather resistance, fatigue resistance and temperature resistance, excellent processability, can be recycled to reduce costs, can be injected with PP, PE, PC, PS, ABS, etc., or can be formed separately. 
2)The thermoplastic polyester elastomer (TPEE) 
Thermoplastic polyether (ester) elastomers, or TPEE. It is a linear block copolymer of dicarboxylic acid derivatives and long chain diol (molecular weight 600 to 6000) and low molecular weight diol mixture got by melt transesterification. TPEE has all vulcanized rubber properties, especially compression and flex resistance at room temperature and low temperature, besides it has processability of plastics. TPEE has rubber elasticity and strength of engineering plastics. And comparing with rubber, it has a better processability and longer service life. Comparing with engineering plastics, it has higher strength, better flexibility and dynamic mechanical properties. TPEE has wide hardness range, high structural strength, flexibility, impact resistance, flex resistance. TPEE has good processability, good melt flowability, melt state stability, low shrinkage, and rapid crystallization. 
3)The thermoplastic polyurethane elastomer(TPU) 
Thermoplastic polyurethane, or TPU. It’s a sort of elastomeric polymer with carbamate groups in backbone, which is a linear polymer, synthesized by polyisocyanate and polyether or polyester alcohol with terminal hydroxyl groups or low molecular weight chain extender diol. Since various polyols and isocyanates are existed, different molecular weight and hard/soft segment combination, TPU has a wide range of types and properties. TPU has both the physical and mechanical properties and strength of rubber, and processability of plastic. Its abrasion resistance, oil resistance, low temperature, radiation resistance are excellent. And it can be processed by extrusion, injection, blow molding, calender, spinning or other methods.

Jiangyin Hetron elastomer New Material Technology Co., Ltd.
ADD:No.32 Songwentou Road Yunting Town in Jiangyin, Jiangsu
ZIP:214422
TEL:0510-80127111-8019
FAX:0510-80127111-8019
Email:whw@hetron.cn

ADD:No.32 Songwentou Road Yunting Town in Jiangyin, Jiangsu
TEL:0510-80127111    Email:whw@hetron.cn
Traffic:BUS No.202、203、205 Zhouxiangtou Station BUS No.60Huangsixiang Road

Jiangyin Hetron elastomer New Material Technology Co., Ltd.    All rights reserved